Take a look at the new and improved Nozzle Buddy. Made of 1/4 inch thick (6mm) Polypropolene which is impervious to most chemicals and gasoline, oils etc,etc. If you have or have used one of these made of metal you may already know that they can ding or scratch your paint if you drop it on the tank or elsewhere. Not with this one. Its softer than the paint and will just bounce off. One look at the picture and you will know what to do. But for the uninitiated here is how it works: 1. remove nozzle from pump 2. pull back spring loaded vapor recovery collar 3. place Nozzle Buddy securely between the recovery collar and the nozzle collar. 4. Make sure Nozzle Buddy is securely in place. 5. release and fill your bike without having the trouble of pushing and pulling, nice and relaxed, no upper body workout, and the tank is full. 6. stop fuel flow, remove nozzle from tank, remove Nozzle Buddy. etc. Price is just $9.95 Plus California sales tax of 8.25% = Total of $10.77 Shipping is FREE. to Lower 48 states. Other locations please inquire. Enjoy the ride. NEWS FLASH NEWS FLASH..... I have just been informed from a very good source that not all gas pumps have the collar on the nozzle tube. BUT MANY STILL DO! Because there is limited risk of fuel spillage from the user forgetting the pump nozzle safety is disabled, by purchasing this item, you agree to the following; To hold harmless and free of any and all legal and or civil liability associated with the use of this product, all persons, entities, resellers, manufacturers, involved in the creation of this product.