Precision Industrial ICP Accelerometer and similar items

Precision Industrial ICP Accelerometer Model: 622B61 New Nos Precision Industrial ICP Accelerometer 622B61 622B61/006AC (10ft) Model: 622B61 Precision Industrial ICP Accelerometer General purpose, industrial, ceramic shear ICP accel, 100 mV/g, 0.2 to 15k Hz, top exit, 10-ft integral armor cable, frequency sweep ISO 17025 accredited calibration The model 622B61 is a 100 mV/g precision accelerometer with 10 ft. integral armored cable. g Model: 622B61 Precision Industrial ICP Accelerometer General purpose, industrial, ceramic shear ICP accel, 100 mV/g, 0.2 to 15k Hz, top exit, 10-ft integral armor cable, frequency sweep ISO 17025 accredited calibration The model 622B61 is a 100 mV/g precision accelerometer with 10 ft. integral armored cable. Specifications Manual (PDF) Specifications (PDF) Drawings (PDF) Downloads ENGLISH SI Performance Sensitivity (5 %) 100 mV/g 10.2 mV/(m/s) [1] Measurement Range 50 g 490 m/s Frequency Range (5 %) 35 to 360000 cpm 0.58 to 6000 Hz [4] Frequency Range (10 %) 25 to 600000 cpm 0.42 to 10000 Hz Frequency Range (3 dB) 12 to 900000 cpm 0.2 to 15000 Hz Resonant Frequency 1800 kcpm 30 kHz [2] Broadband Resolution (1 to 10000 Hz) 50 µg 490 µm/sec2 [2] Non-Linearity 1 % 1 % [3] Transverse Sensitivity ?5 % ?5 % Environmental Overload Limit (Shock) 5000 g pk 49050 m/s pk Temperature Range -65 to +250 F -54 to +121 C Enclosure Rating IP68 IP68 Electrical Settling Time (within 1% of bias) ?5.0 sec ?5.0 sec Discharge Time Constant ?0.8 sec ?0.8 sec Excitation Voltage 18 to 28 VDC 18 to 28 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance 100 Ohm 100 Ohm Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Spectral Noise (10 Hz) 4.0 µg/?Hz 39.2 (µm/sec2)/?Hz [2] Spectral Noise (100 Hz) 0.8 µg/?Hz 7.85 (µm/sec2)/?Hz [2] Spectral Noise (1 kHz) 0.4 µg/?Hz 3.92 (µm/sec2)/?Hz [2] Electrical Protection RFI/ESD RFI/ESD Electrical Isolation 100000000 Ohm 100000000 Ohm Physical Size - Hex 7/8 in 22 mm Size - Height 2.06 in 52.3 mm Weight (without cable) 3.3 oz 94 gm Mounting Thread 1/4-28 Female No Metric Equivalent [5] Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Stainless Steel Stainless Steel Sealing Welded Hermetic Welded Hermetic Electrical Connector Integral Armored Cable Integral Armored Cable Electrical Connection Position Top Top Cable Length 10 ft 3 m Cable Type Polyurethane Polyurethane [6] All specifications are at room temperature unless otherwise specified. Product Notes [1] Conversion Factor 1g = 9.81 m/s. [2] Typical. [3] Zero-based, least-squares, straight line method. [4] The high frequency tolerance is accurate within 10% of the specified frequency. [5] 1/4-28 has no equivalent in S.I. units. [6] Twisted shielded pair. [7] See PCB Declaration of Conformance PS023 for details. Accessories: Supplied 081A40 Mounting Stud (1) ICS-1 NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency (1) Optional Versions: (M) Metric Mount ENGLISH SI Accessories: M081A61 Mounting Stud (1) NEW OLD STOCK. Domestic Shipping . We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS, FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked . International buyers are responsible for any and all applicable customs, duties, taxes and fees. Yaba1957 is an asset recovery wholesaler specializing in new and used surplus industrial equipment. We are not a representative of any manufacturer listed; all names, logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. Yaba1957 is not liable for any products sold, the customer is responsible for proper testing, installation and use of equipment purchased. No warranties are expressed or implied. " The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." amp;amp;amp;lt;div style="text-align:center"amp;amp;amp;gt;amp;amp;amp;lt;a style="text-decoration:none" href="https://mostpopular.sellathon.com/?id=AC321214"amp;amp;amp;gt;amp;amp;amp;lt;img src="https://www.sellathon.com/Resources/Images/countercredit.gif" border="0"amp;amp;amp;gt;amp;amp;amp;lt;/aamp;amp;amp;gt;amp;amp;amp;lt;/divamp;amp;amp;gt;