VEVOR 900W Electric Rebar Bender 5/8Inch and 13 similar items

Features Details 0 - 130 Degrees Excellent Performance: This electric rebar bender bends up to 5/8'' (#5) 16 mm from 0-130 degrees within 4-5 seconds. Max. Rebar Diameter: 5/8'' / 16 mm #5 Grade 60, Min. Rebar Diameter: 3/20'' / 4 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46. It helps save valuable person-hours, raises your working efficiency significantly, and satisfies your various bending demands. 900W Pure Copper Coil Motor: This portable rebar bender features a 900W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Noise: 80 dB(A). Besides, a copper motor can extend this rebar bending machine's operating life to a large extent. Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position. Detachable Positioning Bolt: The electric bender machine with an adjustable positioning bolt allows you to accurately bend any angle within 0-130 degrees, preset angle for repeating the same angle bend. It adopts the sturdy machine body and high-intensity hook, which are not easy to break and stand super-hard rebar with strong clamping force. Multiple screws fixed on the head enforce the stability and sealing. One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.