SFP to SFP Fiber Media Converter - 2 x and 48 similar items

SFP to SFP Fiber Media Converter - 2 x Standard Open SFP Slots - Supports Gigabit, Fast Ethernet and 2.5G SFP miniGBIC modules - Fiber to Fiber Converter - Without Transceivers About this item USE IT as a Single to Multimode Media Converter - 2 x Standard Open SFP slots for any type of SFP (miniGbic) modules USE IT as a Single Mode Dual Fiber to Single Mode Single Fiber Converter - thus, Saving The Fibers! USE IT for Converting Wavelength when Interconnecting Network Devices - i.e. 850 nm to 1300/1310 nm, 1310 nm to 1550 nm and so on. Just find the correct and matching SFP's for both slots! SUPPORTS 1.25G (Gigabit Ethernet), 155M (Fast Ethernet) and even 2.5G SFP modules (Important: Use matching speed modules in Slots A and B only - i.e Gigabit + Gigabit only, do not mix). What comes in the set: 1 unit of 2 x SFP Slot Converter (no SFP modules comes in set), AC power supply, User Manual Product Description Do you have 2 segments of optical fiber network, that do not match in wavelenght or fiber cable type? Or, simply need to extend the distance? AN-UM-2-SMC-AS is Designed for All these purposes and even beyond them - Use Any Standard SFP Module You Have In Hand to Plug In A B SFP slots and You Are Done - It Works! Changing Distance or Fiber Type? Again, Change SFP module , While Keeping Same Media Converter! Here are some possible applications for you to consider: Single Mode to Multimode Conversion Single Mode Dual Fiber to Single Mode Single Fiber Conversion Various Wavelength Conversion - 850 nm to 1310 nm, 1310 nm to 1550 nm (FP to DFB) and so on All These Important Features Are All Supported: Provides 2 open slots for SFP miniGbic modules, all major SFP brands are supported Supporting hot-swap of SFP modules Standards: IEEE802.3z/ab 100/1000/1000Base-T 1000Base-LX/SX (depends on type of SFP module used) Power supply: 100 to 240VAC 50 to 60Hz Dimensions: 70.5mm (L) x 94mm (W) x 26.5mm (H) Environment: Relative humidity; 5% to 90% Operating temperature: 0 to 70 degree Celsius CE, FCC, ROHS, LVD certified Supports Jumbo Ethernet frames up to 9000 bytes Setup of these units are really easy if you follow 4 steps shown in gallery the above. Questions during installation? Not sure it will work with your setup? We are always here to answer You and guide You through! IMPORTANT!: While the unit supports all 3 of the most used tyoes of SFP modules (miniGBIC) - 155M, 1.25G, and 2.5G, use only the same (matching speed modules in Slots A and B at the same time. I.e configuration: Slot A - Gigabit SFP Slot B Gigabit SFP is OK, but Slot A Fast Ethernet SFP - Slot B Gigabit SFP - will not work!