SuperCut B93G14H6 Carbide Impregnated and similar items

For packaging purposes, this blade is folded into a coiled position which is similar to a spring and may pop open when uncoiled. Wear leather gloves and eye/body protection while using extreme care when uncoiling the blade. Failure to exercise the proper care could result in serious bodily injury. See your bandsaw owner's manual for further safety instructions. Please refer to your owner's/operation manual tomake sure the blade's length, width andthickness can fit your bandsaw machine. This premium blade was designed with the professional and serious woodworker in mind. It is truly a unique blade featuring many new advances in blade design. Made from the toughest alloys, the teeth are precision ground and razor sharp, not punched or milled like traditional blades. During the manufacture of this blade, the teeth are impregnated with Carbide particles which greatly improve the cutting life of the blade. The teeth also feature a new aggressive tooth design and set. The sides of the blade are polished smooth and the back of the blade is rounded to allow it to feed and turn with less heat and chatter. This blade is manufactured to the industry's highest standards. No less than 30 inspections and tests insure this is the best blade for the discriminating woodworker. The following bandsaw models use 93 inch ( 7 ft. 9 inch, 7' 9" ) long bandsaw blades. Sears Craftsman Professional 7" x 12"; Dayton 5Z412 6" x 10", Wilton 3400 6" x 10"; Grizzly G0580X, G0555X (92-1/2" to 93-1/2"), G1758 7" x 12",G9978 7" x 12"; Enco 137-3163, 137-3167, 137-3169, 137-3171, 137-3175, 137-3178, 137-3190, 137-3195, 137-2000, Swivel Head, 240-7179; Black and Decker 1752;Delta 28-243, 28-283,28-203, 28-303, 28-240; JET HVBS-7M, HVBS-7MW, J-3410 7" x 12"; Dake SE712; General International 90-740 M1; 90-700 M1; 90-725 M1; 90-730 M1; Wellsaw 58BD, 58BW (6-1/.2" x 9-1/2" ); Northern Industrial 8 Model TH203-004; Roll In; Turn Pro Swivel Head;