3D Printed Metal PLA 45% Iron & Chrome and 50 similar items

Transformers G1 Optimus Prime Replacement 3D Printed Smokestacks made with Metal PLA with a 45% Iron Fragments Then Air Burshed Chrome Painted. *****2.0 Version Made of 45% Iron***** These are much stronger than the Silk PLA or Regular PLA. They won't break accidentally, you will have to put a lot of force to break these, now they can be broken as their not 100% iron. I have tested the breaking point. They will mount much tighter and not move around easy, so I do not recommend adjusting with the tip alone as they are a tight fit, and although mine still held up to this I do not recommend doing it to straighten them because if their too tight they could break if excessive force is used. This is a 3D Printed Replacement set of smokestacks for G1 Optimus Prime or Ultra Magnus Smokestacks. The color is a good match but not perfect as the metal print is rougher and this material will only flow through a 0.4mm nozzle, so these may not have a mirror or perfectly smith finish. This is a stock image of one item, so there may be some very minor differences, but you will get one set of x2 almost identical to this one. But please look at all pictures before buying. These cost a lot more to make, so they will cost twice as much as the previous weaker ones. Please ask any questions before buying.