Brand New PNL0800 PowerLift® Rare Earth and similar items

PNL0800PowerLift Magnets These compact yet powerful rare earth PowerLift lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts eliminate the fear of dropping the load being lifted due to power failures. On/Off, Permanent Rare Earth Lifting Magnets These compact, yet powerful, rare earth lift magnets are designed for lifting thick, non-flexing steel. They can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. Permanent magnetic lifts also eliminate the fear of dropping the load being lifted due to power failures. Benefits On/off rare earth design Lifts flat or round loads Easy internal manual release does not contact the load Heat resistant up to 180F (82C) ASME B30.20 BTH-1 Design Category B Service Class 3 Specifications: PNL0800 Measurements in inches and lbs Height 8.875 Length 7.875 Weight 21 Bail Height 2.375 Bail Thickness 0.5 Bail Width 1.75 WLL- Working Load Limit 800 Handle Length 8 Magnet Height 3.875 Magnet Length 6.375 Magnet Width 3.625 Magnetic Pole Quantity 2 Flat Plate Working Load Limit (WLL) in lbs (kg) *Max Sheet Length Due To Sag For Material Thickness For Single Magnet Use Flat Plate Working Load Limit (WLL) in lbs (kg) *Max Sheet Length Due To Sag For Material Thickness For Single Magnet Use SKU 1/4" PLATE (6' Ln) 3/8" PLATE (8' Ln) 1/2" PLATE (8' Ln) 3/4" PLATE (8' Ln) 1" PLATE (10' Ln) 2" PLATE (10' Ln) 3" PLATE (10' Ln) PNL0800 270 (122) 500 (226) 615 (279) 800 (362) 800 (363) 800 (363) 800 (362) NOTE: Working Load Limit (WLL) lifting values for the PowerLift Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8?, use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round Item Lifting Values are based on ideal conditions. Pipe length, wall thickness, diameter and surface condition can all affect the magnet?s performance. Please consult the factory before specifying these magnets for use on round materials. *These maximum sheet lengths are selected due to the sag characteristics of the specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory NA = Not Applicable (Magnets listed will not turn ?ON? on specified material thicknesses.) Round Lifting Working Load Limit (WLL) in lbs (kg) Round Lifting Working Load Limit (WLL) in lbs (kg) SKU Working Load Limit lbs(kg) Minimum Diameter (in) Minimum Thickness (in) PNL0800 400 (181) 3 1/2 NOTE: Working Load Limit (WLL) lifting values for the PowerLift Magnets are stated at 33% of the actual value. Round Item Lifting Values are based on ideal conditions. Pipe length, wall thickness, diameter and surface condition can all affect the magnet?s performance. Please consult the factory before specifying these magnets for use on round materials. *These maximum sheet lengths are selected due to the sag characteristics of the specified sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory NA = Not Applicable (Magnets listed will not turn ?ON? on specified material thicknesses.)