Yamaha R7 (ABS Deleted) Brake lines (3 and similar items

Fitment: Yamaha R7 (ABS Deleted), 3 lines Years: All Note: Please send us a message with your choice for (1) Brake Lines (2) Fittings (3) Logo Tag Color. We will start manufacturing once we receive your color choices. You can see what they look like in the photos. We have also listed the choices within the Item Description. This kit is strictly for race bikes that the ABS system has been removed from. RACE USE ONLY This line Kit is a perfect fit when installed properly. Includes all hardware for mounting including Banjo Bolts and Copper washers. Front kit routing is similar to OEM however, the ABS unit is bypassed and the front brake line goes directly from the front master cylinder to the front left caliper. A new left to right caliper line will be sent. Core Moto stainless braided lines replace all rubber OEM lines. All TC/ABS wire mounts will work with Core Moto lines using our pre installed grommets. Rear line routes from the master cylinder forward to a mounting bracket then back to the caliper. This loop is necessary to give enough slack in the line to remove the rear caliper bracket during tire changes. This kit fits perfectly and clean on the bike. Length changes can be made to the master cylinder and rear caliper line in this kit, as well as choosing the front master cylinder it will be used with. All master cylinders from the menu will come with the proper banjo bend and banjo bolt thread type. OEM Original: Refers to the R7 original Master cylinder. This has a side mounted M10x1.25 Brake line port. NOTE: OEM Brembo 1.25 and OEM Brembo 1.0 do not refer to the R7 master cylinder. These options refer to OEM Brembo Master cylinders that have bottom mounted brake line port. Example: 2016 R6 is OEM Brembo 1.25 / European bikes are 1.0 All aftermarket Master cylinders listed have bottom mounted brake line ports with M10x1.0 threads. Note: Please send us a message with your choice for (1) Brake Lines (2) Fittings (3) Logo Tag Color. We will start manufacturing once we receive your color choices. You can see what they look like in the photos. (1) Available Brake Line Colors: Carbon Look Clear Sky Blue Solid Black Solid Blue Solid Gold Solid Orange Solid Pink Solid Red Solid White Solid Yellow Translucent Blue Translucent Green Translucent Magenta Translucent Red (2) Available Fitting Colors: Solid Black Solid Kawasaki Green Solid White Solid Orange Translucent Blue Translucent Gold Translucent Purple Translucent Red Translucent Kawasaki Green (3) Available Logo Tag Options: Black with Red Logo Black with White Logo Kawasaki Green with Black Logo White with Black Logo Orange with Black Logo Dark Green with Black Logo Blue with Black Logo Sky Blue with Black Logo Red with Black Logo Included: Core Moto Brake lines with proper lengths, banjo bend angles, mounting grommets and colours according to your model and order details New low profile stainless shell banjo bolts with lightened heads New copper crush washers Installation and brake bleeding guide Warranty: Lifetime warranty against leaks, breaks, ruptures and any type of failure of function Features: Made in the USA Uses highest quality materials available, using only top-grade materials and construction Outperforms industry / market standards (see "testing section" below) Each line features an inner core Teflon hose wrapped tightly in a cold drawn high tinsel 32 strand stainless steel braid. Each line is coated with a flexible PVC outer shell for superior strength, corrosion resistance and abrasion protection. Color banjo fittings will not fade in the sunlight as they are not aluminum and are not color anodized. Quality is felt directly by the rider. Customizable colors, ensuring your bike has a truly unique look. DOT Certified Testing: Core Moto's Teflon core stainless steel lines can be bent 18,000,000 times before rupture compared to only 750,000 bends of the standard PTFE used by other companies. These Hoses have been batch tested to 18,000 psi without failure (normal motorcycle braking pressure is 800 - 1,000 psi). Most companies only test assemblies up to to 5,000 psi. Core Moto uses line material that out performs industry standards. Note: During times of high demand, it is possible for a specific color to be out of stock. We will contact you if this happens, and will provide you with the option to update your order or to cancel if this occurs. Visit My Store Fitment: Yamaha R7 (ABS Deleted), 3 lines Years: All Note: Please send us a message with your choice for (1) Brake Lines (2) Fittings (3) Logo Tag Color. We will start manufacturing once we receive your color choices. You can see what they look like in the photos. We have also listed the choices within the Item Description.