1967 Chevy Camaro SS Convertible 1/24 Scale and similar items

This model ships in a retail window box. This model about 7.5 inches long, 3 inches wide and 2.25 inches high. It is highly detailed, with glossy body paint and accurate markings. Doors and hood can open to reveal interior and engine. This is not a toy. Recommended for 15 and older. The first-generation Chevrolet Camaro is an American pony car introduced by Chevrolet in the fall of 1966 for the 1967 model year. It used a brand-new rear-wheel-drive GM F-body platform and was available as a 2-door, 2+2 seat, hardtop, and convertible. The F-body was shared with the Pontiac Firebird for all generations. A 230 cu in Chevrolet straight-6 was standard, with several Chevy V8s available as options. The first-generation Camaro was built through the 1969 model year. The 1967 styling was done by the same team that had designed the 1965 second-generation Corvair. The Camaro shared the subframe / semi-unibody design with the 1968 Chevy II Nova. Almost 80 factory-and 40 dealer-installed options were offered, including the RS, SS, and Z/28 main trim packages. The SS included a 350 cu in (5.7 L) producing 295 bhp (299 PS; 220 kW) at 4800 rpm and 380 lb?ft (515 N?m) at 3200 rpm of torque; and the L35 and L78 396 cu in (6.5 L) big-block V8 engines producing 325 bhp (330 PS; 242 kW) or 375 bhp (380 PS; 280 kW) at 5600 rpm and 415 lb?ft (563 N?m) at 3600 rpm of torque were available. The SS featured non-functional air inlets on the hood, special striping, and SS badging on the grille, front fenders, gas cap, and horn button. In 1967, a Camaro RS/SS convertible with a 396 engine paced the Indianapolis 500; 100 replicas were sold to the public.