Lewitt DTP640REX Bass kick Drum Instrument and 50 similar items

Lewitt DTP 640 REX Bass kick Drum Instrument Microphone Kick drum microphone with two capsules. DTP 640 REX Dual-element instrument microphone Dynamic and condenser capsule in one housing Separate outputs for both capsules For kick drum and other bass-heavy sources Three switchable sound characteristics Cardioid polar pattern Included: Audio cable, Transport bag Your mic for double-power kick drum sound. The DTP 640 REX is a dual-element microphone specifically designed to capture the sound of your drums and percussion instruments. It features two phase-aligned capsules, a condenser and a dynamic one. You can also switch between three sounds for more flexibility in studio and live applications. Dual-element kick drum microphone Two capsules for the best of your source. We put two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the kick drum, while the condenser element captures the drum's low end. Each element has a dedicated output. This enables you to shape the kick drum sound in unique ways. For kick drum and other bass-heavy sources Cuts a good figure on your drums and bass. With the DTP 640 REX, you get massive yet clear kick drum and bass recordings, in the studio and on stage. The capsule is specifically designed to replicate low frequencies with precision and punch. Three switchable sound characteristics Hear and feel that kick. Dynamic =//= Condenser Both elements with neutral frequency response. Dynamic +//= Condenser Dynamic element boosts low frequencies; condenser stays neutral. Dynamic +//+ Condenser Dynamic boosts the range of 4-6 kHz, condenser boosts low frequencies. Sturdy metal housing This mic is built to last. The DTP 640 REX features a hardened hexagonal ruthenium-galvanized steel mesh grille and a solid die-cast metal body. Specifications Type Dynamic, moving coil, Condenser, permanently polarized Acoustical operating principle Pressure gradient transducer Transducer O 31.7 mm, 1.25 in Transducer O 22.4 mm, 0.88 in Polar pattern Cardioid EFR, ?Enhanced Frequency Response' settings Sensitivity, = // = FFR 0.4 mV/Pa (-69 dBV), dynamic 2 mV/Pa (-54 dBV), condenser Sensitivity, + // = Dynamic EFR 0.4 mV/Pa, -69 dBV/Pa, dynamic 2 mV/Pa, -54 dBV/Pa, condenser Sensitivity, + // + Dual EFR Condenser and dynamic matched at 1 mV/Pa, -60 dBV Self-noise 28 dB (A) Max. SPL for 0.5 % THD 150 dBSPL, 0 dB attenuation Dynamic range of mic. amp. (condenser) 122 dB Pre-attenuation pad 0 dB -10 dB -20 dB Rated impedance dynamic 500 ? Rated impedance condenser 200 ? Supply voltage 48 V 4 V Current consumption 2 mA Connector Gold plated 3-pin and 5-pin XLR Cable 1.5 m (4.95?) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs