Omnipure - K5633 - 12" x 2.5" T40 GAC and similar items

FEATURES BENEFITS Fine filtration of treated drinking water to ingredient water quality Helps standardize beverage quality at disparate locations Reduces maintenance problems in water-using equipment Removes more than 95% of disinfectant chlorine Takes out common earthy, fishy, musty tastes and odors Filters out fine particulates, including dirt, rust, oxidized iron manganese and sulfide Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction SPECIFICATIONS Dimensions: 2.5" x 12" Capacity: 2,500 Gallons Media: Acid Washed 12 x 40 Mesh Carbon Coconut Maximum Pressure: 125 PSI Temperature: 30-100F (2-38C) Service Flow Rate: 0.5 GPM (1.9 LPM) Threaded fittings must be wrapped with Teflon tape before installation Install Teflon taped fittings and tighten firmly Flush new cartridge with 5 gallons of water prior to use and check for leaks. Replace cartridge when rated capacity is reached, or when flow becomes too slow Install in compliance with state and local laws and regulations Case Quantity: 25 Pieces (Pricing is per piece) TYPICAL APPLICATIONS Pre-filtration for RO Drinking fountains Ice Machines Other point-of-use applications **Interchangeable carbon with T28, T33 and T40 models. National Pipe Thread (NPT) Size Measured Against a Ruler* Actual Diameter (Inches) National Pipe Thread (NPT) (Fractional) 0.405" 1/8" 0.540" 1/4" 0.675" 3/8" 0.840" 1/2" *NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.