Dairyland Electrical MTL-6-12-B Acc and similar items

Dairyland Electrical MTL-6-12-B Accessory Conductor Kit 12” For Bolted Terminals 287A. Product Description Accessory conductor kits (set of two finished conductors) can be supplied with any Dairyland device in one of several copper wire sizes, and in customizable lengths. Standard lengths of 12? and 36? have been established and are recommended for convenience. Custom lengths longer than 36” can be ordered in 12” increments and may be ordered in inches by substituting the 12” or 36 in the model number shown in the table below (Example: MTL- 6-48-A). Conductors will be supplied with crimped terminals on one end, while the other end is left unfinished, allowing cutting to length in the field. Bolted style terminals for field installation are also included for the unfinished ends. The required bolts, nuts and washers to attach the conductors to the device are furnished with each unit. For applications that do not require terminals for the unfinished ends of the conductors such as decoupling Gradient Control Mats, append the model number with “-X” Selection of conductor size relates to the AC fault current duty imposed upon it and can be easily coordinated with Dairyland decoupler rating or other logical application considerations per the below table. Notes: For applications where bolted style terminals for the unfinished end of the conductors are not required, append the model number with “-X”. (Example: MTL-6-12-A-X). MTL Conductor Kits do not apply to PCRH models. For PCRH models, please use the ACL Conductor Kit. MTL KIT INCLUDES #6 AWG, #2 AWG or 2/0 AWG insulated conductors, cut to length specified by customer Compression terminals installed by Dairyland to one end Bolted terminals for unfinished end of conductors