Pontiac Cassette or CD radio display control and similar items

ReplacementRadios, one of the largest factory audio/video websites, has branched out!! If you?ve been to our site, you know we have a HUGE selection of OEM radios and compatible accessories. Now we?re offering a few select products here too. Same great ReplacementRadios quality.....in a new location. SUMMARY Factory original Cassette radio control display board Can be used in CD or CD-Cassette radios too It just lacks bulbs for the CD specific features See more in DETAILS section below Cheaper than the CD board we have listed Not a complete radio! It is the board in the first two pics Those are front and back views The last picture is for your reference only!! (The pic of the radio) Has never been installed in a vehicle Removed from a new radio Solves a variety of problems: Burnt out display Burnt out button lights Erratic volume control Will require removal of radio from vehicle Do not attempt with radio plugged in!! Will require dis-assembly of radio An install advice section appears below Do not attempt unless you are qualified Will not require programming Unless something is wrong with your radio Your VIN is stored in memory in your radio Works in a variety of part numbers See list in DETAILS section below Works in a variety of vehicles See list in APPLICATIONS section below May not have the small XM logo But it will still display XM text on the screen NOT compatible in basic CD or cassette radios Those have the display towards the right side This one is to the left of center Tested before shipment, for your peace of mind Our model number for this is P04CAB It does not have a GM part number GM never sold these 90 day warranty DETAILS This is a part for a radio. NOT a complete radio! It is the control-display board that goes behind the face. The face is not included. Just the control-display board you see in the first two pics. This would be used if your current display is burnt out and/or you have lights out behind buttons and don't want to spend the money for a new radio. (Not to mention the associated programming that would come with a new radio.) Your VIN is stored in memory in your radio, so installation of this part will not require programming, unless there is something wrong with your radio. See the INSTALL ADVICE section below for installation pointers. This is new. It was removed from an assembly line leftover radio we have in such quantity, it would take too long for us to sell all of them as complete units. This is a very problematic part, so we decided to part the radios out and offer this separately. It includes a 90 day warranty, for your peace of mind. This board was found in up-level am/fm/cassette radios in the vehicles listed below. It can also be used in am/fm/cd/cass and up-level am/fm/cd radios in the same vehicles but please note there is no bulb for the cd eject button or guide lights for the CD slot, since those things were not present on the cassette version we are selling. Likewise, there is no bulb behind the RDM letters on preset 3, since there is no random feature for cassette playback. Obviously none of these things impact your ability to use this board. And we've priced it cheaper than the CD board, so it is an excellent way to save some money. Some radio part numbers that can use this board are: 09391392, 09391832, 09394352, 10311741, 10311743, 10311744, 10317991, 10317995, 10317996, 10318435, 10318439, 10318440, 10333582, 10335227, 10335228, 10346317, 10346321, 10348716, 10352018, 10352020, 10439778, 12207119, 12220939, 12220949, 12231689, 15222339, 15223357, 16241482, 21002356, 22711910, 22724376, 25721601, 25734853, 25736704, 25753859, 25753860, 25752756, 25752757, and more. Please send us a message BEFORE purchasing if you don't see your radio part number listed and want to make sure it will work for you. APPLICATIONS This display control board can be used in the following vehicles, with up-level cassette, up-level single CD, or CD/Cassette radio: Aztek: 2001-2004 Bonneville: 2000-2005 Grand Am: 2001-2005 Grand Prix: 2005-2008 Montana: 2000-2003 Sunfire: 2000-2003 Vibe: 2003-2008 (with GM radio only) Your radio has the VIN in memory, so it should not require programming after replacing this part unless there is something wrong with the radio. INSTALL ADVICE Installation is pretty easy. The very first thing you MUST do is unplug the radio from the vehicle or disconnect the negative battery terminal and let the radio sit for at least 30 minutes!! To dis-assemble it, you will need a regular screwdriver to remove the bottom plate, a 3/16 nut driver to remove the cassette drive (if applicable) and a 1/8 nut driver to remove the display/control board from your face. You need to disconnect both plugs for the board BEFORE removing the face. They are both under the bottom plate, under the cassette drive (if applicable.) You will also have to pull the knobs off the face before removing the screws holding the board to the face. (Make sure the front of the face is pointed down when you do this, as the buttons can fall out the back once the board is off.) Then you will repeat in reverse... ABOUT US: We are NOT a salvage yard. We are NOT affiliated with a salvage yard. We don't have the typical auto parts mentality. We specialize in one thing: factory audio/video. We are very picky and strive to provide radios that we would be proud to have in our own vehicles. When you buy an item from us, it is guaranteed to work. Occasionally problems arise with electronics. However, please be assured we never knowingly send out a defective item. It is not in our best interest to send out defective items because we waste time and money replacing them under our warranty. We aim to keep our returns low and our customer satisfaction high. Please give us a chance to add you to our long list of satisfied customers. SHIPPING HANDLING Shipping cost is based on weight and zip code. This site does the figuring, not us. If you feel their calculation is high, you might be underestimating the package weight and/or current shipping costs from our zip code (62401) to yours. Please don't ding us for shipping in the ratings, as we have no control over ever-increasing carrier rates. We will enter a tracking number into your order details here on the site. They will email it to you if your notification preferences are set correctly. A signature is not typically required. If you are not home to receive the package, it will most likely be left at your door. Please monitor it's progress and arrange to collect it when it arrives. This site provides a section/tab in each ad for Shipping information. We encourage you to check that section for prices, methods, time-frames, etc.