Victron Automotive IP65 Battery Charger and 50 similar items

Thanks to its seven-step charging algorithm, this professional smart charger maintains the health of your 12V lead-acid or Lithium batteries, and helps provide better performance and a longer battery life. A force-fed low current function can also recover some deeply-discharged 'dead' lead-acid batteries, which can save you the expense of buying a replacement. Built-in LEDs and one-button operation sets and shows the charging status and battery condition. Alternatively, the active charge status and operation can be set and checked in real-time via a Bluetooth enabled Smartphone, tablet or laptop. A graphical view and historical usage statistics can be viewed for the past 40 charge cycles, and expert settings can be set for optimum charging. The charger's IP65 splash and dustproof rating makes it ideal for use in workshops, and safety features protect against reverse polarity, short circuits, and over-temperature. Supplied with 1.5m long lead with protected battery clamps or M6 eye t Note: This item requires Australian Standard 230V / 50Hz mains power supply to operate. Please check your local power supply to ensure that this item will work in your country. Adapters and transformers may be required and are not included. IP Rating : IP65 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 5 - Water jets Length : 182mm Width : 81mm Height : 45mm Weight : 900g Mains Voltage Range : 220V, 250V Frequency : 50Hz, 50Hz Mains Max Current : 0.6A Packaged Volume : 2.93l Packaged Weight : 1kg Packaged Length : 28cm Packaged Width : 19cm Packaged Height : 5.5cm Type of Batteries : AGMDeep Cycle Gel CellSealed Lead Acid (SLA) Charger Output Voltage : 7.2V, 14.4V Charger Output Current : 1.1A Controller Type : Multi-Stage Connection Ty