Marantz - MPM1000 - Studio Recording and 50 similar items

Brand NEW! Designed for home recording on a minimal budget, the Marantz Professional MPM-1000 brings the essence of traditional studio condenser microphones to a price class that's attractive to first-time songwriters, novice producers, and musicians who are just starting to record their instruments. Since it comes with a shockmount, tabletop tripod stand, and mic cable, the MPM-1000 offers a lot for a small investment. Featuring an aluminum-plated, 0.7"-diameter, large-diaphragm condenser capsule, the MPM-1000 is able to capture audio with a strong output level and a smooth sound, making it capable for speech, vocals, and instruments such as acoustic guitar. The cardioid polar pattern yields good isolation from room noise, especially when positioned close to the sound source. Like most studio condenser mics, the MPM-1000 is intended to connect to the XLR mic input of any mixer, mic preamp, or audio interface that can supply phantom power. Versatile Applications With its high sensitivity and smooth frequency response, the MPM-1000 offers a strong output signal and versatile tone that's well suited for speech, vocals, and plenty of acoustic instruments. Great for Home Recording and Personal Studios Since the MPM-1000 utilizes a cardioid polar pattern, it can effectively reject sound behind the mic, such as computer noise and room echo, while primarily picking up sound in front of it as well as some from the sides. Connects to Preamps with Phantom Power Like many studio condenser microphones, the MPM-1000 runs on 48V phantom power, though it can still operate when receiving as little as 9V phantom power. This and its XLR output connector mean that it should be connected to a mic preamp, an audio interface, or a mixer equipped with an XLR mic input and phantom power. Easy Mounting Thanks to the included shockmount, the MPM-1000 can be isolated from vibration noise and floor-borne rumble. Attach it to the supplied tabletop tripod or place it on a taller mic stand for more flexible positioning in the studio. Bundled Accessories The mic comes with a foam windscreen, which helps to minimize breathing sounds and wind noise from fans. It also includes an XLR microphone cable, so you can connect the mic to an available XLR mic input. Features at a Glance Side-address design like traditional studio condenser mics Condenser capsule with pure-aluminum-plated 0.7" diaphragm Cardioid polar pattern reduces room ambience High sensitivity Smooth frequency response Includes windscreen, shockmount, tabletop tripod stand, and XLR cable Microphone Primary Applications Studio Recording Form Factor Large Diaphragm Mic / Stand/Boom Mount Intended Sound Sources Vocals, Speech/Voice Over, Instrument Sound Field Mono Operating Principle Pressure Gradient Capsule Condenser Diaphragm 0.71" / 18 mm Polar Pattern Cardioid Orientation Side Address Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Gain Adjustment None Indicators None On-Board Controls None Windscreen Foam (Included) Performance Frequency Range 20 Hz to 20 kHz Maximum SPL 136 dB SPL (1 kHz, 1% THD) Impedance 200 Ohms 30% at 1 kHz Load Impedance 1000 Ohms Sensitivity -38 dBV/Pa at 1 kHz Signal-to-Noise Ratio 77 dB Equivalent Noise Level 17 dB A-Weighted Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic) Headphone Connector None Power Bus Power None Operating Voltage 9 to 48 V (Phantom Power) Operating Current Consumption 3 mA Physical Color Black Mounting Shockmount (Included) Included Case None Included Filters None Dimensions o: 1.9 x L: 6.5" / o: 4.8 x L: 16.5 cm Weight 10.5 oz / 298 g Packaging Info Package Weight 1.88 lb Box Dimensions (LxWxH) 9.5 x 8.9 x 3.35" - All international buyers are responsible for all tax, duties and/or customs fees.