BetaFPV Pavo20 Pro and Nightfire DJI O4 Air Unit Pro Conversion Kit

Description:

This 3D printed canopy will allow you to convert the BetaFPV Pavo20 Pro and Nightfire to the new DJI O4 Pro system. The canopy is 3D printed with a Dark Gray PETG for durability and has flexible rubberized TPU O4 camera isolator inserts to reduce vibrations to the camera. This is a 1-for-1 replacement of the original canopy and has brass thread inserts like the original. Also available is an optional TPU action camera mount and screw, this will allow the installation of a naked GoPro camera like the GEPRC GP9, GP10, GP11, GoPro Bones or Flywoo naked GoPro's. 

COMPATIBILITY:
This mount is only compatible with the Pavo20 Pro and Pavo 20 Pro Nightfire, it will not work with the smaller Pavo20. 

INSTALLATION (SEE PHOTOS):
Remove the existing canopy and VTX by removing the 4 screws holding it in place, keep the screws as they will be reinstalled later. Install the O4 Air Unit onto the X-brace using the included M2x4mm screw, use the inner set of holes in the brace. Install the TPU camera isolators into the canopy. Install the O4 camera using the 4 screws that came with the O4 Air Unit Pro.  Install the two O4 antennas that came with the O4 Air Unit Pro by sliding them into the back of the canopy, this is a snug fit to keep them from sliding out during flight. Install the 7-pin cable that came with the O4 Air Unit, the original 7-pin cable that came with the drone is too short. Align the X-brace with the canopy and reinstall onto the frame using the previously removed screws.  

INCLUDES:
- 4 3D PRINTED PETG FRAME
- 2 TPU CAMERA ISOLATORS
- 1 3D PRINTED PETG O4 PRO BRACE
- 1 TPU ACTION CAMERA MOUNT & SCREW (OPTIONAL)
- 4 M2X4MM SCREWS TO MOUNT O4 UNIT

REQUIRES (NOT INCLUDED):
- Pavo20 Pro or Pavo 20 Pro Drone
- O4 Air Unit Pro and included antennas and 7-pin cable
- 1.5mm hex driver

NOTE:
Adding additional weight to the PAVO20 Pro can reduce flight times. Using a Naked GoPro can reduce flight time by approximately 30%. Try to keep your payload as light as possible for the best performance (this is a tiny drone after all). 

The GEPRC camera, drone and O4 Air Unit Pro shown in the photos IS NOT INCLUDED AND IS SHOWN FOR DEMONSTRATION ONLY. INCLUDES (1) ONE 3D PRINTED KIT, AND HARDWARE MENTIONED ABOVE.

**Disclaimer - Aerial-Pixel will not be held responsible for the use and/or misuse of this product. Any damages to equipment or bodily damage are solely the responsibility of the purchaser.**
Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Pavo20 Pro

Installation

Remove the existing canopy and VTX by removing the 4 screws holding it in place, keep the screws as they will be reinstalled later. Install the O4 Air Unit onto the X-brace using the included M2x4mm screw, use the inner set of holes in the brace. Install the TPU camera isolators into the canopy. Install the O4 camera using the 4 screws that came with the O4 Air Unit Pro.  Install the two O4 antennas that came with the O4 Air Unit Pro by sliding them into the back of the canopy, this is a snug fit to keep them from sliding out during flight. Install the 7-pin cable that came with the O4 Air Unit, the original 7-pin cable that came with the drone is too short. Align the X-brace with the canopy and reinstall onto the frame using the previously removed screws.  

Shipping

We ship USPS first class to the US. We combine shipping and handling. First item shipping is calculated at checkout for USA each additional item is only $1.00 per item (See listing details, sometimes shipping will be on sale for free!). We know you are anxious to receive your item and we do our best to make it and ship quickly! Please allow us 3 business days to ship your item as every item is made to order. If you would like your order rushed, we can ship same day/next day for an additional charge of $5 per order. Please contact us if you would like this service.
International shipping is available and is calculated at checkout. International shipping can be expensive at times, for this we apologize.

Payment

We accept Paypal. Please pay within 2 days of winning the auction.

Returns

Returns are accepted within 14 days of receiving the item, buyer pays return shipping costs.