OEM Mikuni carburetor for 2000-2018 Suzuki DRZ400 S/SM models. Code stamp 29FB. Just missing the main jet, pilot jet (threads are good), float bowl gasket, and the float needle spring button is stuck so that will need to be replaced. Also the jet needle is aftermarket junk and so you will need to find a stock needle to replace that. Otherwise carb is ready to go, all threads and mating surfaces are good, no corrosion issues, nothing stuck, slide diaphragm is excellent no holes or pinched edges, air cut diaphragm is good, throttle shaft/flap has proper movement and has not been tampered with, choke plunger has been cleaned and has smooth proper movement as well (detent ball as spring are in there) showing only light wear on plunger rubber tip, nothing is stuck, no bad damage anywhere etc.. etc... Applicable parts have been sonic cleaned and all ports passages have been sprayed out with carb cleaner and are clear. It has the stock mikuni #P-0 needle jet and the power jet installed. Very nice carb here. Everything has been cleaned and inspected to be as ready for using as possible. Ships assembled (loosely). Please check pics for more info on condition. What you see is what you get. Any questions feel free to ask, thanks -phil