Fast Shipping
On All Items

30 Days Money
Guarantee

Customer Support
Excellent Service

100% Satisfaction
Satisfaction Guaranteed

Station Hot Air Rework Station 2-IN-1 with LCD Display, PID Control, Hot Air Start/Stop, Sleep Mode, 3 Extra Nozzles, 5 Extra Soldering Tips, Solder Wire

Specification

Item model number WEP 938BD-I
Part Number WEP 938BD-I
Batteries Required? No
Lower Temperature Rating 392 Degrees Fahrenheit
Power Source ac
Brand WEP
Upper Temperature Rating 896 Degrees Fahrenheit
Product Dimensions 5.91"D x 5.35"W x 3.94"H
Material Other
Country of Origin China
Warranty Description Technical Support
Type of Bulb LCD
Item Weight 4.42 pounds
Batteries Included? No
Voltage 110 Volts
Display Type LCD
Wattage 110 watts
Manufacturer Guangzhou Yihua Electronic Equipment Co., Ltd.


5.35 "h x 5.91 "h x 3.94 "h. Weight: 4.42 lb
 

Item Description

     

  • Advanced & Precise: This advanced 2-in-1 station integrates soldering station, hot air rework station into one soldering iron kit with essential features and functions. LCD display presents the set temperature and actual temperature on the screen clearly and precisely. Real-time soldering iron power meter and hot air gun air volume are shown on the display via a car-style dashboard.
  • High-power Performance: Soldering iron's 110W heating element enables the soldering station to heat up fast, with an adjustable temperature from 392°F~896°F. The hot air gun's also heats up rapidly, with an adjustable temperature from 212°F~896°F and the maximum air volume of 120L/ min. When heating, the built-in PID program will detect and compensate the temperature loss every 20 milliseconds to achieve fast temperature recovery.
  • Better protection: The hot air rework station enters standby mode by when the hot air gun is placed inside the holder, cooling the temperature to below 212°F, and turns off the blower. The soldering iron enters sleep mode to idle at a low temperature when unused for 10 minutes. Both functions prevents unnecessary wear on the hot air gun & soldering iron’s heating element (and soldering tips), extending lifespan for both.
  • Greater convenience: °C/°F conversion satisfies your need of different units. Press one knob to change the unit setting. This soldering iron kit is equipped with a complete set of accessories. 3 extra hot air nozzles with different diameters allows you to work with different components. Brass wool with solid-state rosin not only cleans your soldering tips, but also minimizes temperature loss when cleaning.
  • This 2 in 1 station is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.

Product Description

WEP introduces the 938BD-I Soldering Hot Air Rework Station with dynamic LCD display to give you both the soldering and hot air function in one station.

Soldering Station

  • High Performance Heating Element
  • Temperature Range: 392~896°F
  • Temperature Stabilization: PID Program
  • Able to solder larger joints

Hot Air Rework Station

  • Fast-heating Performance
  • Temperature Range: 212~896°F
  • Temperature Stabilization: PID Program
  • 120L/Min Maximum Air Volume

Suitable Applications

  • SMD Soldering & Hot Air Rework
  • Through-Hole Soldering & Desoldering
  • Wire soldering (up to 10AWG)
  • Heat-shrink, pre-heat, and more

All parameters of the soldering iron and the hot air gun is neatly showcased on the dynamic LCD display, parameters shown include:

  • Actual Temperature
  • Set Temperature
  • Power Meter (Soldering)
  • Air Volume Indicator (Hot Air)
  • Temperature Unit (Fahrenheit/Celsius)
  • Sleep Mode (Soldering)
  • Auto Start/Stop (Hot Air Gun)
  • Calibration

10-Minute Sleep Mode

  • Enter sleep mode after 10-minute non-use
  • Idles at 392°F
  • Extend lifespan of soldering tip & heating element

Hot Air Start/Stop

  • Cools automatically when inside holder
  • Stops operation once cooled to below 212°F
  • Extend lifespan of heating element

Digital Calibration

  • ONLY use professional thermometer (as shown in the image)
  • Measure actual temperature
  • Enter measured temperature
  • Calibration complete

Specifications

Model number 938BD-I
Rated voltage range 110V-127V/AC, 60Hz
Rated frequency 60Hz
Rated power 810W
Main unit dimensions L5.9*W5.35*H3.94in±0.2in
Operating ambient temperature 0℃~40℃/32℉~104℉
Hot Air Rework Station
Air delivery Brushless blower with smooth air delivery
Temperature range 100℃~480℃/212℉~896℉
Display LCD
Soldering Station
Temperature range 200℃~480℃/392℉~896℉
Display LCD
Tip to ground resistance <2ohms

 

 

 

 

 


    Return Policy 

• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.

      Feedback

• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.