Compatible with every SWITCH console released before June 2018.
Available models (range)
XAJ: 100001-100285, 4000001-400533, 7000001-700435
XAW: 1000501-100793, 400001-400123, 7000001-700178
XAK: 100000-100047
The model barcode can be viewed in the white area next to the charging port
Please check if your console is in the above range.
Support for payload.bin injection file.
Built-in Atmosphere, ReiNX and SXOS payload files, one key switch payload.
Built-in Li-on battery, 1000 times inject with 1-hour charging time.
Easy to manage, recognized as U disk immediately When connect computer or mobile phone
Excellent compatibility for Windows, macOS, Linux and Android operating system.
The Guide for the Usage Method:
1. Preliminary preparation and instructions
1). Equipment and tool preparation: One Switch host that can be soft broken, TF memory card, card reader, and Windows computer
(Do not use Mac computers, mobile phones, tablets, etc. to transfer files, only Windows computers are required)
2). The latest integration package version is continuously updated and backward compatible.
3). Unused TF memory cards need to be inserted into the genuine system of the host once to identify the memory card, which is very important!
2.Check TF memory card format
Choose FAT32 or exFAT format. exFAT supports copying files of 4G or above, while FAT32 has better compatibility
3.Download the atmospheric integration package and unzip it to the root directory of the memory card. (You can find the playload files in the online).
4.Inject power on
(1) Ensure that the game console is turned off, insert the short connector into the bottom of the right joystick slide, making sure it is ON facing downwards (the short connector is inserted on the back of the injector); Injector inserted into the charging port of the game console for injection
(2) First press and hold the volume key+on the host (hold it down and don't let go), then press the power button again to release it
After entering the atmospheric system interface, both the injector and the short circuiting device can be unplugged (to be precise, after the injection step is completed, they can be unplugged without waiting for startup).
Injecting power will enter the atmosphere and the Hecate interface
This step is not necessary, but it is strongly recommended to perform a backup. Before backing up, please confirm that the available space on the TF card is greater than 30G. If you really don't want to back up, skip this step.
Click on the tool at the top of the interface to enter the tool page,
Click on eMMC BOOT0&BOOT1 to perform the first backup, and then click on the top right corner to close and return to the interface.
Then click on eMMC RAW GPP for the second backup! This project has a slightly longer backup time, it is recommended to connect it to the power supply
After the backup is completed, return directly to the main menu.
Then click on the shutdown button in the bottom right corner to turn off the Switch and remove the TF card
Connect the card reader and TF card to the computer, copy the backup folder to the computer for backup, and then delete the backup folder on the TF card.
5.Create a virtual system (a virtual system is an independent system)
A virtual system is not necessary and can be made according to the actual situation, but it is generally strongly recommended to crack and make it for the first time. The virtual system needs to occupy 30GB of TF card space.
Short circuit injection according to the previous injection steps to enter the Hecate interface
Click on the virtual system button on the right
The first time entering the virtual system interface, an orange X will be displayed in the upper left corner, indicating that the virtual system is currently in a closed state!
Click the Create emuMMc button on the right to start creating the virtual system.
Select the first button SD card file in the pop-up windowThe virtual system is created in the form of files on the TF card SD: \ emummc \ for easy backup and storage. The virtual system and all its data are stored here.
Wait until all progress bars show 100%, even if the production is completed. The production is very fast, averaging around 11-14 minutes to complete.
After the production is completed, click the close button in the upper right corner to return to the previous interface. The green ? is displayed as open,
The virtual system has been completed
Click the close button in the upper right corner to return to the HeKate main interface, then click the close button in the lower right corner to turn off the switch.
Package Includes:
1 x RCM Loader
1 x Micro USB Cable
1 x RCM Clip